Subaru Legacy 2004 Service Manual page 2930

12) After tightening the axle nut, lock it securely.
13) Install the wheel and tighten the wheel nuts to
specified torque.
Tightening torque:
"
90 N m (9.2 kgf-m, 66 ft-lb)
C: DISASSEMBLY
1) Remove the four bolts from housing, and re-
move the front hub unit bearing and disc cover.
(A) Housing
CAUTION:
• Do not get closer the tool which charged
magnetism to magnetic encorder.
• Be careful not to damage the magnetic en-
coder.
(1)
(1) Magnetic encoder
(2) Front hub unit bearing
2) Disassemble the front hub unit bearing. <Ref. to
DS-18, DISASSEMBLY, Front Hub Unit Bearing.>
Front Axle
DS-00048
(A)
DS-00231
(2)
DS-00250
DS-15
D: ASSEMBLY
1) Assemble the front hub unit bearing. <Ref. to
DS-18, ASSEMBLY, Front Hub Unit Bearing.>
2) Place the disc cover between housing and front
hub unit, and tighten the four bolts.
Tightening torque:
"
65 N m (6.6 kgf-m, 47.9 ft-lb)
(A) Housing
CAUTION:
• Do not get closer the tool which charged
magnetism to magnetic encorder.
• Be careful not to damage the magnetic en-
coder.
(1)
(1) Magnetic encoder
(2) Front hub unit bearing
E: INSPECTION
1) Moving the front tire up and down by hand,
check there is no backlash in bearing, and check
the wheel rotates smoothly.
DRIVE SHAFT SYSTEM
(A)
DS-00231
(2)
DS-00250
DS-00061