Subaru Legacy 2004 Service Manual page 3746

GLASS/WINDOWS/MIRRORS
8. Outer Mirror Assembly
A: REMOVAL
1) Remove the mirror gusset cover.
: (1)
(1) Hook
C: INSPECTION
Check that the rearview mirror moves properly when the battery voltage is applied to terminals.
• Model without mirror heater
Switch position
OFF
UP
DOWN
LEFT
RIGHT
• Model with mirror heater
Switch position
OFF
UP
DOWN
LEFT
RIGHT
Replace the outer mirror assembly if defective.
Outer Mirror Assembly
2) Remove the door trim. <Ref. to EI-48, REMOV-
AL, Door Trim.>
3) Disconnect the mirror connector.
4) Remove the screws to remove mirror assembly.
GW-00277
B: INSTALLATION
Install in the reverse order of removal.
GW-18
Terminal No.
—
6 (+) and 3 ($) or 8 ($)
3 (+) or 8 (+) and 6 ($)
7 (+) and 3 ($) or 8 ($)
3 (+) or 8 (+) and 7 ($)
Terminal No.
—
7 (+) and 3 ($) or 9 ($)
3 (+) or 9 (+) and 7 ($)
8 (+) and 3 ($) or 9 ($)
3 (+) or 9 (+) and 8 ($)
GW-00278