Subaru Legacy 2004 Service Manual page 3496

AIRBAG SYSTEM (DIAGNOSTICS)
• The removed front seat with an airbag module
must be kept at least 200 mm (8 in) away from walls
and other objects.
(1) 200 mm (8 in) or more
• When painting or performing sheet metal work
on the front part of the vehicle, including the front
wheel apron, front fender and front side frame, re-
move the front sub sensors and wire harness of the
airbag system.
• When painting or performing sheet metal work
on the side of the vehicle, including the side sill,
center pillar and front and rear doors, remove the
side airbag sensors and wire harness of the airbag
system.
• Do not discard undeployed airbag modules.
They could easily cause a serious accident if acci-
dentally deployed.
General Description
(1)
AB-00128
AB-00129
AB(diag)-6