Subaru Legacy 2004 Service Manual page 3317

11) Disconnect the return hose and pressure hose
from gearbox.
(1)
(1) Return hose
(2) Pressure hose
12) Remove the clamp bolts securing gearbox to
crossmember, and remove the clamp.
(1) Clamp
Steering Gearbox [RHD Model]
(2)
PS-00536
(1)
PS-00448
POWER ASSISTED SYSTEM (POWER STEERING)
13) Remove the bolts which secure the gearbox
bracket, and remove the bracket and gearbox.
(1) Bracket
B: INSTALLATION
1) Insert the gearbox into the crossmember, being
careful not to damage gearbox boot.
2) Install the gearbox and bracket. Tighten the bolt
temporarily.
(1) Bracket
3) Tighten the gearbox to the crossmember bracket
via clamp with bolt temporarily.
(1) Clamp
4) Tighten the bolts which temporary tightening the
clamp and bracket of gearbox to specified torque.
Tightening torque:
#
60 N m (6.1 kgf-m, 44.1 ft-lb)
PS-47
(1)
(1)
(1)
PS-00449
PS-00449
PS-00448