Subaru Legacy 2004 Service Manual page 3624

SEAT BELT SYSTEM
B: INSTALLATION
1. OUTER SEAT BELT RH ASSEMBLY AND
LH ASSEMBLY (SEDAN MODEL)
Install in the reverse order of removal.
CAUTION:
• During installation, make sure that the seat
belts are not twisted.
• After installation, make sure that the seat
belts are smoothly extended and wound.
2. SHOULDER SEAT BELT CTR ASSEM-
BLY (SEDAN MODEL)
Install in the reverse order of removal.
CAUTION:
• During installation, make sure that the seat
belts are not twisted.
• After installation, make sure that the seat
belts are smoothly extended and wound.
3. CENTER SEAT BELT LH ASSEMBLY
(SEDAN MODEL)
Install in the reverse order of removal.
CAUTION:
During installation, make sure that the seat
belts are not twisted.
4. OUTER SEAT BELT RH ASSEMBLY AND
LH ASSEMBLY (WAGON MODEL)
Install in the reverse order of removal.
CAUTION:
• During installation, make sure that the seat
belts are not twisted.
• After installation, make sure that the seat
belts are smoothly extended and wound.
5. SHOULDER SEAT BELT CTR ASSEM-
BLY (WAGON MODEL)
Install in the reverse order of removal.
CAUTION:
• After seat belt guide installation, make sure
that the seat belts are wound.
Rear Seat Belt
• During installation, make sure that the seat
belts are not twisted.
• After installation, make sure that the seat
belts are smoothly extended and wound.
6. CENTER SEAT BELT RH ASSEMBLY
AND LH ASSEMBLY (WAGON MODEL)
Install in the reverse order of removal.
CAUTION:
During installation, make sure that the seat
belts are not twisted.
C: INSPECTION
1. OUTER SEAT BELT RH ASSEMBLY AND
LH ASSEMBLY (SEDAN MODEL)
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent or wore. Seat belt is
abnormally wound or extended.
2. SHOULDER SEAT BELT CTR ASSEM-
BLY (SEDAN MODEL)
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent or wore. Seat belt is
abnormally wound or extended.
3. CENTER SEAT BELT LH ASSEMBLY
(SEDAN MODEL)
Check for the following, and replace with new parts
if necessary.
• Inner belt is deformed or damaged.
• Seat belt buckle cannot be engaged properly.
4. OUTER SEAT BELT RH ASSEMBLY AND
LH ASSEMBLY (WAGON MODEL)
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent or wore. Seat belt is
abnormally wound or extended.
5. SHOULDER SEAT BELT CTR ASSEM-
BLY (WAGON MODEL)
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent or wore. Seat belt is
abnormally wound or extended.
6. CENTER SEAT BELT RH ASSEMBLY AND
LH ASSEMBLY (WAGON MODEL)
Check for the following, and replace with new parts
if necessary.
• Inner belt is deformed or damaged.
SB-00157
• Seat belt buckle cannot be engaged properly.
SB-16