Subaru Legacy 2004 Service Manual page 3644

Hide thumbs Also See for Legacy 2004:

Table of Contents

LIGHTING SYSTEM

12.Headlight Assembly

1) Disconnect the ground cable from battery.

2) Remove the air intake duct. (When removing the

headlight RH)

3) Remove the front grille. <Ref. to EI-24, REMOV-

AL, Front Grille.>

4) Remove the front bumper. <Ref. to EI-30, RE-

MOVAL, Front Bumper.>

5) Disconnect each harness connector.

6) Remove the 4 bolts and disengage clips, and

then detach the headlight assembly.

B: INSTALLATION

Install in the reverse order of removal.

C: DISASSEMBLY

• Do not touch the bulb glass portion.

• Do not touch inside the lens (extension por-

tion) or reflector portion.

• Replace the packing with a new one.

Headlight Assembly

1) Remove the headlight assembly. <Ref. to LI-14,

REMOVAL, Headlight Assembly.>

2) Remove the eight screws.

3) Remove headlight side bracket.

4) Heat the sealing portion between headlight as-

sembly and lens using heating gun.

(A) Headlight side bracket

Chapters

Table of Contents