Subaru Legacy 2004 Service Manual page 3879

4. Sunroof Assembly
A: REMOVAL
1. SEDAN MODEL
1) Disconnect the ground cable from battery.
2) Remove the roof trim. <Ref. to EI-67, SEDAN
MODEL, REMOVAL, Roof Trim.>
3) Disconnect the harness connector of sunroof
motor.
4) Remove the glass lid. <Ref. to SR-6, SEDAN
MODEL, REMOVAL, Glass Lid.>
5) Remove the drain tube from frame assembly.
6) Remove the assist rail bracket (front) (A) and
sunroof bracket (rear) (B).
(A)
7) Remove the nuts, and then remove the frame
assembly.
2. WAGON MODEL
1) Disconnect the ground cable from battery.
2) Remove the roof trim. <Ref. to EI-67, WAGON
MODEL, REMOVAL, Roof Trim.>
Sunroof Assembly
(B)
SR-00078
SR-00079
SR-9
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
3) Disconnect the harness connector of motor as-
sembly.
4) Remove the front and rear glass lid. <Ref. to SR-
6, WAGON MODEL (FRONT), REMOVAL, Glass
Lid.> <Ref. to SR-6, WAGON MODEL (REAR),
REMOVAL, Glass Lid.>
5) Remove the installation bolts (A) on rear side
frame bracket of frame assembly.
6) Remove the drain tube from frame assembly.
7) Remove the frame bracket (A).
SR-00080
(A)
SR-00081