Subaru Legacy 2004 Service Manual page 3301

9) Using a press remove the pinion & valve assem-
bly from valve housing.
(1)
(2)
(3)
(1) Pinion & valve ASSY
(2) Valve housing
(3) Cloth
10) Using the ST and press, remove the bushing
and oil seal from valve housing.
ST 34199AG090 INSTALLER & REMOVER
CAUTION:
• Do not apply force to the end surface of valve
housing.
• Do not reuse the oil seal after removal.
(1) Oil seal
(2) Bushing
11) Using a snap ring pliers, remove the snap ring,
valve, oil seal and backup washer.
Steering Gearbox [LHD Model]
PS-00149
ST
(1)
(2)
PS-00150
PS-31
POWER ASSISTED SYSTEM (POWER STEERING)
CAUTION:
Be careful not to scratch the pinion & valve as-
sembly.
(3)
(2)
(1)
(1) Snap ring
(2) Valve
(3) Oil seal
(4) Backup ring
D: ASSEMBLY
1. RACK HOUSING ASSEMBLY
1) Using a press, install the bushing to the gearbox
installation portion.
2) Insert the ST into rack.
ST 34199AG040 GUIDE (3.0 R model)
ST 34199AG030 GUIDE (Except for 3.0 R mod-
el)
ST
(1) Seal ring
(2) Rack
(4)
PS-00518
PS-00519
(1)
(2)
PS-00520