Subaru Legacy 2004 Service Manual page 3678

WIPER AND WASHER SYSTEMS
4. WASHER TANK
(1)
(2)
(A) Sedan model
(1) Washer nozzle
(2) Washer hose
(3) Washer tank
(4) Washer tank cap
C: CAUTION
• Connect the connectors and hoses securely during reassembly.
• After reassembly, make sure functional parts operate smoothly.
• Be careful that wiring harnesses of airbag system pass near electrical parts and switches.
• Wiring harnesses and connectors of all airbag system are yellow color. Do not use a tester equipment on
these circuits.
• Care must be taken when connecting the piping hose so that no bending, jamming, etc. are caused.
• If even a little oil or grease such as silicon oil gets in the tank and washer passages, an oil film is easily
formed on the glass, causing the wiper to chatter and judder, therefore, be careful not to let this happen.
General Description
(1)
(4)
(3)
(7)
T
(5)
(2)
(B) Wagon model
(5) Front washer motor
(6) Rear washer motor
(7) Grommet
(8) Washer motor cover
(7)
(6)
(8)
WW-6
(1)
(A)
(1)
(2)
!
!"#$%&'"'#(%)*+,&-(N
m(./#0123(0%1456
!- 89:(.:9873(;9;6
(B)
WW-00168