Subaru Legacy 2004 Service Manual page 3807

7) Remove the two bolts from the reclining hinge on
each left and right side.
8) Remove the clips and hooks, and then detach
the backrest back cover.
9) Remove the lock clip, and then remove the lum-
ber support lever.
Front Seat
10) Remove the hooks at the rear side of backrest.
NOTE:
For the seat with side airbag, the airbag module in-
stallation side is secured with hog rings (A).
SE-00413
11) Remove the cover frame (A).
SE-00334
12) Remove the headrest lock bushing.
NOTE:
Push outside to remove it from the inside of seat.
SE-00414
13) Pull out the backrest frame assembly.
SE-11
(A)
(A)
SEATS
SE-00335
SE-00415
SE-00337
SE-00243