Rear Window Glass - Subaru Legacy 2004 Service Manual

Hide thumbs Also See for Legacy 2004:

Table of Contents

15.Rear Window Glass

1) Disconnect the electrical connectors from rear

defogger terminal.

2) Remove the glass in the same procedure as for

windshield glass. <Ref. to GW-25, REMOVAL,

Windshield Glass.>

B: INSTALLATION

1) Bond the dam rubber.

(1) Locating pin (bonded)

(2) Dam rubber

(3) 11 mm (0.433 in)

(4) 4 mm (0.157 in)

(5) Rear window glass

2) Install the glass in the same procedure as for

windshield glass. <Ref. to GW-26, INSTALLA-

TION, Windshield Glass.>

3) Connect the connector to the rear defogger and

antenna terminals.

4) After completion of all work, allow the vehicle to

stand for about 24 hours.

• When door is opened/closed after glass is bond-

ed, always lower the door glass and then open/

close it carefully.

• Move the vehicle slowly.

• For minimum drying time and vehicle standing

time before driving after bonding, follow instruc-

tions or instruction manual from the adhesive man-

Rear Window Glass

5) After curing of adhesive, pour the water on exter-

nal surface of vehicle to check that there are no wa-

When a vehicle is returned to the user, tell him or

her that the vehicle should not be subjected to

heavy impact for at least three days.

GLASS/WINDOWS/MIRRORS

Table of Contents