Subaru Legacy 2004 Service Manual page 3806

SEATS
18) Remove the bolts, and then remove the slide
rail.
19) Remove the hooks and hog rings at the bottom
of headrest, and then remove the headrest cover
from headrest.
2. POWER SEAT
1) Remove the seat from vehicle. <Ref. to SE-7,
REMOVAL, Front Seat.>
2) Remove the seat switch knob.
Front Seat
3) Disconnect the connector of reclining motor from
the back of seat cushion.
4) Remove the screw (A) and clips (B), and then
disconnect the seat switch connector to remove
seat hinge outer cover.
SE-00409
5) Remove the screw (A) and clip (B), and then re-
move the seat hinge inner cover.
SE-00342
6) Remove the TORX
inner belt.
SE-00410
SE-10
(B)
(B)
(A)
®
bolt, and then remove the
SE-00383
(B)
(A)
SE-00411
SE-00412
SE-00407