AIRBAG SYSTEM
12.Front Sub Sensor
A: REMOVAL
1) Turn the ignition switch to OFF.
2) Disconnect the ground cable from battery and
wait for at least 20 seconds before starting work.
3) Remove the front bumper face. <Ref. to EI-30,
FRONT BUMPER FACE, REMOVAL, Front
Bumper.>
4) Remove the bolts, and then detach the front sub
sensor.
5) Disconnect the connector from front sub sensor.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion". <Ref. to AB-3, FRONT SUB SENSOR,
COMPONENT, General Description.>
C: INSPECTION
Check for the following, and replace the damaged
parts with new parts.
• Front sub sensor, mounting bracket and connec-
tor are damaged.
• Airbag is deployed.
Front Sub Sensor
AB-00636
AB-24