Subaru Legacy 2004 Service Manual page 3849

7. Front Door Lock Actuator
A: REMOVAL
1) Remove the front door latch & door lock actuator
assembly. <Ref. to SL-30, REMOVAL, Front Door
Latch and Door Lock Actuator Assembly.>
2) Remove the pawl of front door latch security cov-
er, and then remove the cover. (Model without dou-
ble lock)
3) Remove the screw from the front door latch and
door lock actuator, and then remove the door lock
actuator. (Model without double lock)
(1)
(1) Front door lock actuator
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure the lock works correctly after installa-
tion.
C: INSPECTION
1) Disconnect the door lock actuator harness con-
nector.
2) Connect the battery to door lock actuator termi-
nals.
If defective, replace the door lock actuator.
1. Model without double lock
Terminal No.
No. 2 (+) and No. 1 (")
No. 1 (+) and No. 2 (")
Front Door Lock Actuator
SL-00282
2 1
SL-00235
Actuator operation
Unlocked $ Locked
Locked $ Unlocked
2. Model with double lock
6 5 4 3 2 1
DOOR ACTUATOR RH:
Terminal No.
No. 5 (+) and No. 1 (")
No. 1 (+) and No. 5 (")
No. 6 (+) and No. 1 (")
No. 1 (+) and No. 6 (")
DOOR ACTUATOR LH:
Terminal No.
No. 2 (+) and No. 6 (")
No. 6 (+) and No. 2 (")
No. 1 (+) and No. 6 (")
No. 6 (+) and No. 1 (")
SL-31
SECURITY AND LOCKS
SL-00283
Actuator operation
Unlocked $ Locked
Locked $ Unlocked
Double lock released $
Double lock set
Double lock set $ Double
lock released
Actuator operation
Unlocked $ Locked
Locked $ Unlocked
Double lock released $
Double lock set
Double lock set $ Double
lock released