Subaru Legacy 2004 Service Manual page 3462

AIRBAG SYSTEM
3. DRIVER'S AIRBAG (BETWEEN AIRBAG
MAIN HARNESS AND ROLL CONNECTOR),
PASSENGER'S AIRBAG
1) How to disconnect:
(1) Push the slide lock (A) into the direction of
arrow.
(A)
(2) With the slide lock pushed, disconnect the
connector.
CAUTION:
When pulling the side lock or disconnecting the
connector, be sure to hold onto the connector
and not the wire.
2) How to connect:
Holding the connector, and push it in carefully until
a connecting sound is heard.
CAUTION:
Be sure to insert the connector in until it is
locked. Then pull on it gently to make sure that
it is locked.
Airbag Connector
4. SIDE AIRBAG AND CURTAIN AIRBAG
1) How to disconnect:
(1) Push the lock arm (A).
(2) With the lock arm (A) pushed in, move the
slide lock (B) in the direction of arrow.
AB-00722
(3) With the slide lock moved, release the lock
arm (back to its original position), and discon-
nect the connector.
CAUTION:
When pulling the side lock or disconnecting the
connector, be sure to hold onto the connector
and not the wire.
AB-00022
5. FRONT SUB-SENSOR, SIDE AIRBAG
SENSOR AND CURTAIN AIRBAG SENSOR
1) How to disconnect:
Holding the outer part (A), pull it in the direction of
arrow.
CAUTION:
When pulling the side lock or disconnecting the
connector, be sure to hold onto the connector
and not the wire.
AB-00023
AB-10
(B)
(A)
AB-00017
AB-00018
AB-00024