Subaru Legacy 2004 Service Manual page 3621

B: INSTALLATION
1. OUTER SEAT BELT ASSEMBLY
Install in the reverse order of removal.
CAUTION:
• The parts of driver and passenger sides are
not identical. Before installation, make sure
that the correct part is used.
• Be careful not to twist the seat belts during
installation.
Tightening torque:
<Ref. to SB-2, FRONT SEAT BELT, COMPO-
NENT, General Description.>
2. INNER SEAT BELT ASSEMBLY
Install in the reverse order of removal.
Tightening torque:
<Ref. to SB-2, FRONT SEAT BELT, COMPO-
NENT, General Description.>
C: INSPECTION
1. OUTER SEAT BELT ASSEMBLY
Check for the following, and replace with new parts
if necessary.
• Pretensioner is cracked or deformed.
• Seat belt is slackened, bent or worn. Seat belt is
abnormally wound or extended.
2. INNER SEAT BELT ASSEMBLY
Check for the following, and replace with new parts
if necessary.
• Inner seat belt assembly is deformed or dam-
aged.
• Seat belt buckle cannot be engaged properly.
Front Seat Belt
SB-13
SEAT BELT SYSTEM