Subaru Legacy 2004 Service Manual page 3650

LIGHTING SYSTEM
15.Clearance/Parking Light Bulb
A: REMOVAL
1) Remove the air intake duct. (When removing the
clearance light/parking light bulb RH).
2) Remove the battery cover. (When removing the
clearance light/parking light bulb LH)
3) Tilt the washer tank filler neck. (When removing
the clearance/parking light bulb)
4) Remove the headlight low beam back cover (B).
5) Turn the socket (A) and remove the bulb.
(A)
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new one.
Clearance/Parking Light Bulb
LI-00273
(B)
LI-00285
LI-20