Subaru Legacy 2004 Service Manual page 3329

Installed tie-rod length L:
31 mm (1.22 in)
32) Inspect the gearbox as follows:
"A" Holding tie-rod end, repeat lock to lock two or
three times as quickly as possible.
"B" Holding tie-rod end, turn it slowly at a radius one
or two times as large as possible.
After all, make sure that the boot is installed in the
specified position without deflation.
33) Take off the gearbox from ST.
ST1 926200000 STAND
ST2 34199AG000 BOSS D
34) Install the pipe A and B to steering body and
control valve housing.
Tightening torque:
#
T1: 20 N m (2.0 kgf-m, 14.5 ft-lb)
#
T2: 24 N m (2.4 kgf-m, 17.4 ft-lb)
T1
(2)
T2
(1) Pipe A
(2) Pipe B
Steering Gearbox [RHD Model]
L
PS-00097
A
B
PS-00098
T1
T2
(1)
PS-00500
POWER ASSISTED SYSTEM (POWER STEERING)
PS-59