Subaru Legacy 2004 Service Manual page 3858

SECURITY AND LOCKS
15.Front Hood Lock Assembly
A: REMOVAL
1) Open the front hood.
2) Remove the bolts, and then detach the front
hood lock assembly.
3) Remove the release cable from lock assembly.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
• Apply grease to the movable part.
• Make sure the release cable works correctly after
installation.
C: ADJUSTMENT
Loosen the bolt, and adjust the lock assembly while
moving it up and down.
D: INSPECTION
1) Check the striker for deformation or abnormal
wear.
2) Check the safety lever for improper movement.
3) Check other levers and the spring for rust forma-
tion and unsmooth movement.
Front Hood Lock Assembly
SL-00287
SL-00290
SL-40