Subaru Legacy 2004 Service Manual page 2991

ABS (DIAGNOSTICS)
Step
1 DATA CHECK SUBARU SELECT MONITOR.
1) Select {Current Data Display & Save} in
Subaru Select Monitor.
2) Read the condition of "ABS warning light".
2 CHECK WIRING HARNESS.
Measure the resistance between ABSCM con-
nector and combination meter connector.
Connector & terminal
(i10) No. 5 — (B301) No. 22:
3 CHECK POOR CONTACT IN CONNECTOR. Is there poor contact in
Subaru Select Monitor
Check
Is "ON" indicated?
Is the resistance less than 0.5
&?
ABSCM connector and combi-
nation meter connector?
ABS(diag)-24
Yes
Replace the Go to step 2.
ABSCM only.
<Ref. to ABS-8,
REPLACEMENT,
ABS Control Mod-
ule and Hydraulic
Control Unit
(ABSCM&H/U).>
Go to step 3. Repair the har-
ness and connec-
tor between
ABSCM&H/U and
combination meter
connector.
Repair the con- Check the combi-
nector. nation meter.
No