Subaru Legacy 2004 Service Manual page 3689

6. Front Wiper Arm
A: REMOVAL
CAUTION:
When replacing wiper blades or etc., be sure to
stand up the driver side wiper arm first, then
passenger side wiper arm next. Also, when put-
ting the wiper arms back, be sure to start with
passenger side first, then driver side next. Do-
ing this in the reverse order may result in dam-
age of passenger side wiper arm by hitting with
driver side wiper blade.
1) Open the hood.
2) Remove the cap.
3) Remove the nut to remove wiper arm.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Operate the wiper once.
3) Align the wiper blade to ceramic print point mark
(A) of front window panel.
(A)
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion".
<Ref. to WW-2, FRONT WIPER, COMPO-
NENT, General Description.>
Front Wiper Arm
C: ADJUSTMENT
Operate the wiper once. Align the wiper blade to
ceramic print point mark (A) of front window panel.
WW-00232
WW-00048
WW-17
WIPER AND WASHER SYSTEMS
(A)
WW-00048