Subaru Legacy 2004 Service Manual page 3323

20) Set the stopper to gearbox, and then insert the
tip of ST to gearbox.
(1) Stopper
(2) Oil seal
21) By fixing the 2-surface width, press-in by rotat-
ing the rod and attach to oil seal.
(1) Rod
(2) 2-surface width
Steering Gearbox [RHD Model]
PS-00070
PS-00071
PS-53
POWER ASSISTED SYSTEM (POWER STEERING)
22) While fixing the 2-surface width, pull out the oil
seal by rotating nut.
CAUTION:
Take care not to scratch the gearbox inner sur-
face.
(1) 2-surface width
(2) Nut
D: ASSEMBLY
1) Apply a coat of grease to the inside and outside
of new oil seal.
Steering grease:
VALIANT GREASE M2 (Part No. 003608001)
2) Verify the oil seal direction and installation posi-
tion. Using the ST and press, press-fit the oil seal to
gearbox.
ST 34199AE130 GEARBOX OIL SEAL IN-
STALLER
(1) Oil seal
PS-00072
PS-00073