LIGHTING SYSTEM
29.Spot Map Light
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the lens (A) and spot map light mount-
ing screws (B).
(A)
• Model with sunroof
• Model without sunroof
3) Disconnect the harness connectors and remove
the spot map light.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1. SPOT MAP LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new one.
Spot Map Light
LI-00313
(B)
LI-00314
(B)
(B)
LI-00320
2. SPOT MAP LIGHT SWITCH
Measure the resistance between spot map light
switch terminals.
Switch position
OFF
ON
LI-34
Terminal No.
Standard
—
More than 1 M!
18%5.4 !
1 and 2