Subaru Legacy 2004 Service Manual page 3522

Hide thumbs Also See for Legacy 2004:

Table of Contents

AIRBAG SYSTEM (DIAGNOSTICS)

10.Clear Memory Mode

A: OPERATION

1) Remove the instrument panel lower cover upper.

<Ref. to EI-50, REMOVAL, Instrument Panel Low-

2) Turn the ignition switch to ON.

3) Connect one of the ground terminals to the diag-

nosis connector terminal No. 2 in the instrument

panel lower cover area.

4) While the warning light blinks, connect another

diagnosis terminal to the diagnosis connector ter-

minal No. 3.

5) Once the memory is erased, the warning light re-

turns the normal blink pattern (0.6 sec. on). Failure

to recover to the normal blink rate indicates that

trouble parts still remain. Having repaired such

parts, erase the memory again and confirm that the

blink rate has returned to normal.

6) When the memory has been cleared, disconnect

the diagnosis terminal from the diagnosis connec-

7) Wind the tape around the ground terminal and

return it to its original position.

Clear Memory Mode

Chapters

Table of Contents