Subaru Legacy 2004 Service Manual page 3861

17.Ignition Key Lock
A: REPLACEMENT
1) Disconnect the ground cable from battery.
2) Remove the steering column. <Ref. to PS-23,
REMOVAL, Tilt Steering Column.>
3) Secure the steering column in a vise. Remove
the bolt with a drill.
4) Remove the ignition key lock.
5) Using a new bolt, tighten the bolts all the way.
B: INSPECTION
1) Remove the instrument panel lower panel.
2) Remove the lower column cover.
3) Unfasten the fixing clip which secures harness,
and then disconnect the connector of the ignition
switch from body harness.
4) Turn the ignition key plate to each position and
check the continuity between terminals of ignition
connector.
3
6
Ignition Key Lock
SL-00024
SL-00025
2 1
5 4
SL-00266
Switch position
LOCK
ACC
ON
ST
If NG, replace the ignition switch.
SL-43
SECURITY AND LOCKS
Terminal No. Standard
— —
Less than 1 #
No. 3 and No. 4
No. 3 and No. 1
Less than 1 #
and No. 4
No. 3 and No. 6
No. 3 and No. 1
Less than 1 #
No. 3 and No. 2
and No. 6