Subaru Legacy 2004 Service Manual page 3231

4) Apply a thin coat of Molykote AS880N (Part No.
K0777YA010) to the three frictional portions be-
tween inner shim and outer shim of outer pads.
5) Install the pad on support.
6) Install the caliper body on support.
Tightening torque:
"
27 N m (2.8 kgf-m, 19.9 ft-lb)
7) Using new brake hose gaskets, connect the
brake hose.
Tightening torque:
"
18 N m (1.8 kgf-m, 13.0 ft-lb)
8) Bleed air from brake system.
2. 16-INCH TYPE
Refer to 15-inch type. <Ref. to BR-20, 15-INCH
TYPE, INSTALLATION, Front Disc Brake Assem-
bly.>
3. 17-INCH TYPE
1) Install the support on housing.
Tightening torque:
"
80 N m (8.2 kgf-m, 59 ft-lb)
2) Apply a thin coat of Molykote M7439 to the pad
clip.
Front Disc Brake Assembly
3) Apply a thin coat of Molykote AS880N (Part No.
K0777YA010) to the frictional portion between pad
and inner shim.
BR-00341
4) Apply a thin coat of Molykote AS880N (Part No.
K0779YA010) to the three frictional portions be-
tween inner shim and outer shim of outer pads.
BR-00340
BR-21
BRAKE
BR-00238
BR-00341