Subaru Legacy 2004 Service Manual page 3640

LIGHTING SYSTEM
9. Combination Switch (Light)
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the instrument panel lower cover. <Ref.
to EI-56, REMOVAL, Instrument Panel Assembly.>
3) Remove the screws and remove the steering
column cover (upper and lower).
4) Disconnect the connector from combination
switch.
5) Remove three screws, and pull the combination
base switch assembly toward you. (Only for KA
model)
Combination Switch (Light)
6) Remove the screws which secure switch, then
remove the combination switch.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Measure the resistance between combination
SL-00258
switch terminals.
1. LIGHTING SWITCH
LI -00332
• LHD model
LI-10
(A)
8 7 6 5 4
17 16 1514131211 10
(B)
8 7 6
17 16 1514131211 10
(A) LHD and EK model
(B) KA model
Switch position Terminal No.
OFF —
Tail 14 and 16
Head 13, 14 and 16
LI-00331
3 2 1
9
5 4 3 2 1
9
LI-00184
Standard
More than 1 M!
Less than 1 !
Less than 1 !