Subaru Legacy 2004 Service Manual page 3651

16.Front Fog Light Assembly
A: REMOVAL
1. EXCEPT FOR OUTBACK MODEL
1) Disconnect the ground cable from battery.
2) Remove the front fog light cover (A).
(A)
3) Disengage the two clips, and then turn over the
lower mud guard.
4) Disconnect the harness connector.
5) Remove the mounting bolts, and then detach the
fog light assembly by pulling it.
Front Fog Light Assembly
2. OUTBACK MODEL
1) Disconnect the ground cable from battery.
2) Remove the two clips, and then turn over the
lower mud guard.
3) Disconnect the harness connector.
4) Remove the mounting bolts, and then detach the
LI-00287
fog light assembly by pulling it.
B: INSTALLATION
LI-00288
Install in the reverse order of removal.
CAUTION:
When installing the fog light assembly, be sure
to secure the upper hock.
LI-00289
LI-21
LIGHTING SYSTEM
LI-00288
LI-00325
LI-00326