Subaru Legacy 2004 Service Manual page 3658

Back-up Light Assembly
LIGHTING SYSTEM
23.Back-up Light Assembly
A: REMOVAL
NOTE:
In case of model with rear fog light, back-up light is
installed to only passenger's side.
1. SEDAN MODEL
Remove the rear combination light. <Ref. to LI-25,
REMOVAL, Rear Combination Light Assembly.>
2. WAGON MODEL
1) Remove the rear gate trim. <Ref. to EI-69, RE-
MOVAL, Rear Gate Trim.>
2) Disconnect the harness connectors and remove
the rear gate garnish. <Ref. to EI-76, REMOVAL,
Rear Gate Garnish.>
3) Remove the mounting nuts and detach the back-
up light assembly.
LI-00301
B: INSTALLATION
Install in the reverse order of removal.
LI-28