Subaru Legacy 2004 Service Manual page 3326

POWER ASSISTED SYSTEM (POWER STEERING)
ST 34099FA060 PUNCH HOLDER
ST
(A) Holder
(B) 3 mm (0.12 in)
12) Roll the vinyl tape on serration part of valve as-
sembly, and then apply grease on the tape surface.
(1) Vinyl tape
Steering Gearbox [RHD Model]
(A)
(B)
ST
PS-00084
PS-00085
13) Apply a coat of grease on the gear teeth of
valve assembly, and then attach the valve assem-
bly taking care not to scratch oil seal and seal ring.
(1) Seal ring
(2) Oil seal
14) Apply grease on the oil seal circumference, and
then press it into the plug using ST and press. Re-
place the O-rings of plug circumference with new
ones.
ST 34199AE110
CAUTION:
Install the oil seal paying attention to its direc-
tion.
(1) Plug
(2) O-ring
(3) Oil seal
PS-56
PS-00086
OIL SEAL PLUG INSTALLER
PS-00087