Subaru Legacy 2004 Service Manual page 2963

Rear Magnetic Encoder
ABS
7. Rear Magnetic Encoder
A: REMOVAL
Refer to "Rear Hub Unit Bearing" for removal, be-
cause the rear magnetic encoder is integrated with
rear hub unit bearing.
<Ref. to DS-19, REMOVAL, Rear Hub Unit Bear-
ing.>
B: INSTALLATION
Refer to "Rear Hub Unit Bearing" for installation,
because the rear magnetic encoder is integrated
with rear hub unit bearing.
<Ref. to DS-20, INSTALLATION, Rear Hub Unit
Bearing.>
C: INSPECTION
Visually check the magnetic encoder for any dam-
age. If necessary, replace with a new hub unit bear-
ing.
NOTE:
Replace the hub unit bearing with a new one if
there is any defect found on the magnetic encoder,
since the magnetic encoder is integrated with hub
unit bearing assembly.
ABS-17