Subaru Legacy 2004 Service Manual page 3662

LIGHTING SYSTEM
27.License Plate Light
A: REMOVAL
1. SEDAN MODEL
1) Remove the trunk lid trim. <Ref. to EI-71,
TRUNK LID TRIM, REMOVAL, Trunk Room Trim.>
2) Turn and remove the bulb socket (A).
3) Remove the bulb.
2. WAGON MODEL
1) Remove the license plate light mounting screw
(A) and then remove the lens (B).
(B)
(A)
2) Remove the bulb.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new one.
License Plate Light
(A)
LI-00307
(B)
(A)
LI-00308
LI-32