Subaru Legacy 2004 Service Manual page 3134

Hide thumbs Also See for Legacy 2004:
Table of Contents

Advertisement

Diagnostic Procedure with Diagnostic Trouble Code (DTC)
Step
9
CHECK OTHER DTC DETECTION.
N: DTC C0031 FRONT INLET SOLENOID VALVE RH MALFUNCTION IN VDC-
CM&H/U
NOTE:
For the diagnostic procedure, refer to DTC C0064 "PRIMARY SUCTION VALVE MALFUNCTION IN VDC-
CM&H/U". <Ref. to VDC(diag)-63, DTC C0064 PRIMARY SUCTION VALVE MALFUNCTION IN VDC-
CM&H/U, Diagnostic Procedure with Diagnostic Trouble Code (DTC).>
O: DTC C0032 FRONT OUTLET SOLENOID VALVE RH MALFUNCTION IN VDC-
CM&H/U
NOTE:
For the diagnostic procedure, refer to DTC C0064 "PRIMARY SUCTION VALVE MALFUNCTION IN VDC-
CM&H/U". <Ref. to VDC(diag)-63, DTC C0064 PRIMARY SUCTION VALVE MALFUNCTION IN VDC-
CM&H/U, Diagnostic Procedure with Diagnostic Trouble Code (DTC).>
P: DTC C0033 FRONT INLET SOLENOID VALVE LH MALFUNCTION IN VDC-
CM&H/U
NOTE:
For the diagnostic procedure, refer to DTC C0064 "PRIMARY SUCTION VALVE MALFUNCTION IN VDC-
CM&H/U". <Ref. to VDC(diag)-63, DTC C0064 PRIMARY SUCTION VALVE MALFUNCTION IN VDC-
CM&H/U, Diagnostic Procedure with Diagnostic Trouble Code (DTC).>
Q: DTC C0034 FRONT OUTLET SOLENOID VALVE LH MALFUNCTION IN VDC-
CM&H/U
NOTE:
For the diagnostic procedure, refer to DTC C0064 "PRIMARY SUCTION VALVE MALFUNCTION IN VDC-
CM&H/U". <Ref. to VDC(diag)-63, DTC C0064 PRIMARY SUCTION VALVE MALFUNCTION IN VDC-
CM&H/U, Diagnostic Procedure with Diagnostic Trouble Code (DTC).>
R: DTC C0035 REAR INLET SOLENOID VALVE RH MALFUNCTION IN VDC-
CM&H/U
NOTE:
For the diagnostic procedure, refer to DTC C0064 "PRIMARY SUCTION VALVE MALFUNCTION IN VDC-
CM&H/U". <Ref. to VDC(diag)-63, DTC C0064 PRIMARY SUCTION VALVE MALFUNCTION IN VDC-
CM&H/U, Diagnostic Procedure with Diagnostic Trouble Code (DTC).>
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS)
Check
Is any other DTC displayed?
VDC(diag)-61
Yes
Perform the diag-
It results from a
nosis according to
temporary noise
DTC.
interference.
NOTE:
Though the ABS
warning light re-
mains on at this
time, it is normal.
Drive the vehicle at
more than 12 km/h
(7 MPH) in order to
turn off the ABS
warning light. Be
sure to drive the
vehicle and check
the warning light
goes off.
No

Advertisement

Table of Contents
loading

Table of Contents