Subaru Legacy 2004 Service Manual page 3649

14.Front Turn Signal Light Bulb
A: REMOVAL
1) When removing the turn signal light bulb, fully
turn the steering wheels to opposite direction from
desired turn signal light bulb.
(1) Turn the steering wheel fully.
(2) Mud guard
(3) Front turn signal light
2) Turn the mud guard inward.
3) Turn the socket (A) from wheel arch part, and
then remove the front turn signal light bulb.
CAUTION:
For 5AT model, remove the turn signal light
bulb LH from engine compartment with remov-
ing battery, because it can not be removed from
wheel arch part.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification.
<Ref. to LI-2, SPECIFICATION, General Descrip-
tion.>
3) If NG, replace the bulb with a new one.
Front Turn Signal Light Bulb
(3)
(2)
(1)
LI-00311
(A)
LI-00283
LI-19
LIGHTING SYSTEM