Subaru Legacy 2004 Service Manual page 3342

POWER ASSISTED SYSTEM (POWER STEERING)
6) Remove the air
IN(H4DOTC)-9, REMOVAL, Air Intake Duct.>
<Ref. to IN(H4SO 2.0)-9, REMOVAL, Air Intake
Duct.>
7) Disconnect the suction hose and pressure hose
from the oil pump.
• Non-turbo model
(2)
• Turbo model
(2)
(1) Suction hose
(2) Pressure hose
8) Disconnect the suction hose and return hose
from reservoir tank. Remove the oil cooler from oil
cooler bracket.
(4)
(3)
(5)
(1)
(2)
(1) Reservoir tank
(2) Suction hose
(3) Return hose
(4) Oil cooler
(5) Oil cooler bracket
Pipe Assembly [RHD Model]
intake duct. <Ref.
(1)
PS-00460
(1)
PS-00452
PS-00482
to 9) Remove the hose bracket and take out the hose
assembly from vehicle.
(1) Hose ASSY
(2) Hose bracket
B: INSTALLATION
1) Temporarily tighten the bolt of hose bracket.
(1) Hose ASSY
(2) Hose bracket
2) Install the resin clip to the pressure hose and
suction hose.
CAUTION:
Align the installation position of the resin clip
with the protector edge of suction hose.
• Non-turbo model
(1)
(4)
(1) Resin clip
(2) Protector
(3) Suction hose
(4) Pressure hose
PS-72
(2)
(1)
PS-00451
(2)
(1)
PS-00451
(2)
(3)
PS-00455