Subaru Legacy 2004 Service Manual page 3228

BRAKE
• When the pad return spring is deformed or
damaged, replace the brake pad with new one.
(1) Pad return spring
(2) Supporting surface of pad clip
5) Install the caliper body on support.
Tightening torque:
"
27 N m (2.8 kgf-m, 19.9 ft-lb)
C: INSPECTION
1. 15-INCH AND 16-INCH TYPE
Check the pad thickness A.
A
Standard value
Pad thickness
mm (in)
Wear limit
NOTE:
• Always replace the pads for both right and left
wheels at the same time.
• Also replace the pad clips if they are twisted or
worn.
• Replace the pad if there is oil or grease on it.
2. 16-INCH TYPE
Refer to 15-inch type. <Ref. to BR-18, 15-INCH
AND 16-INCH TYPE, INSPECTION, Front Brake
Pad.>
Front Brake Pad
(1)
(2)
BR-00343
BR-00360
11 (0.43)
1.5 (0.059)
BR-18
3. 17-INCH TYPE
Check the pad thickness A.
A
Standard
Pad thickness
value
mm (in)
Wear limit
NOTE:
• Always replace the pads for both right and left
wheels at the same time.
• Replace the pad if there is oil or grease on it.
BR-00360
11 (0.43)
1.5 (0.059)