Subaru Legacy 2004 Service Manual page 3666

LIGHTING SYSTEM
31.Luggage Room Light
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove luggage room light body (A).
(A)
3) Disconnect the harness connector and remove
the lens.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1. LUGGAGE ROOM LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new one.
2. LUGGAGE ROOM LIGHT SWITCH
Measure the resistance between luggage room
light switch terminals.
Switch position Terminal No.
OFF
ON 1 and 2
DOOR 2 and 3
Luggage Room Light
LI-00258
3 2 1
LI-00259
Standard
— More than 1 M!
1.5%0.5 !
1.5%0.5 !
LI-36