Subaru Legacy 2004 Service Manual page 3353

10.Reservoir Tank
A: REMOVAL
1) Drain fluid from the reservoir tank.
2) Disconnect the hose from reservoir tank.
CAUTION:
To prevent foreign matter from entering the
hose and pipe, cover the open ends of them
with a clean cloth.
(4)
(3)
(5)
(1)
(2)
(1) Reservoir tank
(2) Suction hose
(3) Return hose
(4) Oil cooler
(5) Oil cooler bracket
3) Remove the reservoir tank from body.
B: INSTALLATION
1) Install the reservoir tank to body.
Tightening torque:
#
13 N m (1.3 kgf-m, 9.4 ft-lb)
2) Connect the hose to reservoir tank.
(4)
(3)
(5)
(1)
(2)
(1) Reservoir tank
(2) Suction hose
(3) Return hose
(4) Oil cooler
(5) Oil cooler bracket
3) Feed the power steering fluid to specified level.
<Ref. to PS-84, Power Steering Fluid.>
Reservoir Tank
POWER ASSISTED SYSTEM (POWER STEERING)
C: INSPECTION
Check the reservoir tank for cracks, breakage and
damage. If a failure is found, replace the reservoir
tank.
PS-00482
PS-00482
PS-83