Diagnostic Procedure with Diagnostic Trouble Code (DTC)
Step
9
CHECK VDCCM&H/U.
1) Turn the ignition switch to OFF.
2) Connect all the connectors.
3) Erase the memory.
4) Perform the inspection mode.
5) Read the DTC.
10
CHECK OTHER DTC DETECTION.
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS)
Check
Is the same DTC displayed?
Is any other DTC displayed?
VDC(diag)-113
Yes
Replace the
Go to step 10.
VDCCM&H/U.
<Ref. to VDC-7,
VDC Control Mod-
ule & Hydraulic
Control Unit
(VDCCM&H/U).>
Perform the diag-
Temporary poor
nosis according to
contact occurs.
DTC.
No