Subaru Legacy 2004 Service Manual page 3665

30.Room Light
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the lens (A) and mounting screws (B).
3) Disconnect the harness connector and remove
the room light.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1. ROOM LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new one.
Room Light
(A)
LI-00315
(B)
LI-00316
2. ROOM LIGHT SWITCH
Measure the resistance between room light switch
terminals.
Switch position
OFF
ON
DOOR
LI-35
LIGHTING SYSTEM
3 2 1
LI-00257
Terminal No. Standard
— More than 1 M!
1.5%0.5 !
1 and 3
1.5%0.5 !
2 and 3