Subaru Legacy 2004 Service Manual page 3388

Hide thumbs Also See for Legacy 2004:

Table of Contents

HVAC SYSTEM (HEATER, VENTILATOR AND A/C)

7. Blower Motor Unit Assembly

1) Disconnect the ground cable from battery.

2) Remove the glove box. <Ref. to EI-51, REMOV-

AL, Glove Box.>

3) Disconnect the connectors of A/C control mod-

ule, intake door actuator, blower motor, power tran-

sistor and blower resistor.

4) Loosen the bolt and nut to remove blower motor

unit assembly.

B: INSTALLATION

Install in the reverse order of removal.

Tightening torque:

Refer to "COMPONENT" of "General Descrip-

tion". <Ref. to AC-5, HEATER COOLING

UNIT, COMPONENT, General Description.>

<Ref. to AC-7, BLOWER MOTOR UNIT, COM-

PONENT, General Description.>

Blower Motor Unit Assembly

Chapters

Table of Contents