Subaru Legacy 2004 Service Manual page 3636

LIGHTING SYSTEM
5. Turn Signal Light and Hazard
Light System
A: WIRING DIAGRAM
1. TURN SIGNAL LIGHT AND HAZARD
LIGHT SYSTEM
<Ref. to WI-282, WIRING DIAGRAM, Turn Signal
Light and Hazard Light System.>
B: INSPECTION
1. TURN SIGNAL SWITCH
<Ref. to LI-10, INSPECTION, Combination Switch
(Light).>
2. HAZARD SWITCH
Measure the resistance between hazard switch ter-
minals.
Switch position Terminal No.
OFF
2 and 3
ON
3. TURN SIGNAL LIGHT AND HAZARD
LIGHT MODULE
Connect the battery and turn signal light bulb to the
module. The module is properly functioning if it
blinks when power is supplied to the circuit.
3 2 1
8 7 6 5 4
Turn Signal Light and Hazard Light System
4 3 2 1
LI-00261
Standard
More than 1 M!
Less than 1 !
LI-00262
LI-6