Subaru Legacy 2004 Service Manual page 3517

3. DRIVER'S AIRBAG (BETWEEN AIRBAG
MAIN HARNESS AND ROLL CONNECTOR),
PASSENGER'S AIRBAG
1) How to disconnect:
(1) Push the slide lock (A) into the direction of
arrow.
(A)
(2) With the slide lock pushed, separate the
connector.
CAUTION:
Be sure to hold onto the connector and not wire
when pulling the slide lock or disconnecting
the connector.
2) How to connect:
Holding the connector, push it in carefully until a
connecting sound is heard.
CAUTION:
Be sure to insert the connector in until it locks.
Then pull it gently to make sure that it is locked.
Airbag Connector
4. SIDE AIRBAG AND CURTAIN AIRBAG
1) How to disconnect:
(1) Push the lock arm (A).
(2) With the lock arm (A) pushed in, move the
slide lock (B) in the direction of arrow.
AB-00722
(3) With the slide lock moved, release the lock
arm (back to its original position), and discon-
nect the connector.
CAUTION:
Be sure to hold onto the connector and not wire
when pulling the slide lock or disconnecting
the connector.
AB-00022
5. FRONT SUB-SENSOR, SIDE AIRBAG
SENSOR AND CURTAIN AIRBAG SENSOR
1) How to disconnect:
Holding outer part (A), pull it in the direction of ar-
row.
CAUTION:
Be sure to hold onto the connector and not wire
when pulling the slide lock or disconnecting
the connector.
AB-00023
AB(diag)-27
AIRBAG SYSTEM (DIAGNOSTICS)
(B)
(A)
AB-00017
AB-00018
AB-00024