Subaru Legacy 2004 Service Manual page 2964

G Sensor
ABS
8. G Sensor
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the console box.
<Ref. to EI-53, REMOVAL, Console Box.>
3) Disconnect the connector from G sensor.
4) Remove the G sensor from body.
CAUTION:
• Do not drop or bump the G sensor.
• Since G sensor is a unit with the bracket, do
not disassemble them.
ABS00463
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
Do not drop or bump the G sensor.
Tightening torque:
"
7.5 N m (0.76 kgf-m, 5.5 ft-lb)
ABS-18