Subaru Legacy 2004 Service Manual page 3656

LIGHTING SYSTEM
21.Tail/Stop Light Bulb
A: REMOVAL
1. SEDAN MODEL
1) Remove the trunk side trim cover.
2) Turn the socket and remove the bulb.
Model without rear fog light
(A) Tail light
(B) Stop light
Model with rear fog light
(A) Tail/stop light
(B) Rear fog light (Driver's side only)
2. WAGON MODEL
1) Remove the rear combination light assembly.
<Ref. to LI-25, WAGON MODEL, REMOVAL, Rear
Combination Light Assembly.>
2) Turn the socket and remove the bulb.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new one.
Tail/Stop Light Bulb
(A)
(B)
LI-00297
LI-00298
LI-26