Front Inner Remote
SECURITY AND LOCKS
4. Front Inner Remote
A: REMOVAL
1) Remove the door trim. <Ref. to EI-48, REMOV-
AL, Door Trim.>
2) Remove the back cover (1) of inner remote.
3) Remove the outer cable (2).
4) Remove the wire end ball (3).
5) Remove the screws (4), and detach the inner re-
mote handle.
(4)
(2)
(3)
(4)
(1)
SL-00279
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure the inner remote works correctly after in-
stallation.
C: INSPECTION
1) Check the outer wire and inner wire for deforma-
tion. When it is deformed, straighten it because fail-
ure operations may occur. When it is unrepairable,
replace the front door latch & door lock actuator as-
sembly.
2) Check the lever, rod and wire for smooth opera-
tion.
SL-28