Subaru Legacy 2004 Service Manual page 3313

2. SERVICE LIMIT
Make a measurement as follows. If it exceeds the
specified service limit, adjust or replace.
NOTE:
When making a measurement, vise the gearbox
using ST. Never vise the gearbox by inserting alu-
minum plates, etc. between vise and gearbox.
ST1 926200000 STAND
ST2 34199AG000 BOSS D
Sliding resistance of rack shaft:
Service limit
400 N (41 kgf, 90 lb) or less
3. RACK SHAFT PLAY IN RADIAL DIREC-
TION
Right-turn steering:
Service limit
0.19 mm (0.0075 in) or less
Steering Gearbox [LHD Model]
PS-00099
PS-00100
PS-43
POWER ASSISTED SYSTEM (POWER STEERING)
On condition
L: 5 mm (0.20 in)
P: 122.6 N (12.5 kgf, 27.6 lb)
L
P
Left-turn steering:
Service limit
Direction
0.3 mm (0.012 in) or less
Direction
0.15 mm (0.0059 in) or less
5 mm(0.20 in)
4. INPUT SHAFT PLAY
In radial direction:
Service limit
0.18 mm (0.0071 in) or less
On condition
P: 98 N (10 kgf, 22 lb)
P
In axial direction:
Service limit
0.5 mm (0.020 in) or less
PS-00101
98N
(10 kgf, 22 lb)
PS-00102
PS-00103