Subaru Legacy 2004 Service Manual page 3880

SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
8) Remove the bolts (B) and nuts (C), and then remove the frame assembly.
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be careful not to snag the harness.
NOTE:
• Be sure to connect the harness connector.
• When installing the drain tube, insert it securely
into drain pipe.
Length A:
15 mm (0.59 in) or more
C: DISASSEMBLY
1. SEDAN MODEL
1) Remove the glass lid.
2) Slide the sunshade to full front end.
Sunroof Assembly
(B)
(A)
A
SR-00005
(B)
(C)
3) Remove the screw from the slider bracket (A) of
roof side.
4) Pull out the sunshade from roof opening.
NOTE:
For sedan model, sunshade can be removed/in-
stalled with frame assembly installed to the vehicle.
2. WAGON MODEL (FRONT)
1) Remove the frame assembly. <Ref. to SR-9,
REMOVAL, Sunroof Assembly.>
2) Slide the sunshade to fully open position, and
then remove the screw from slider bracket (A).
3) Pull out the sunshade to backward.
SR-10
(A)
SR-00082
(A)
SR-00084
(A)
SR-00084