Advertisement

2004 LEGACY SERVICE MANUAL

BODY SECTION

This service manual has been prepared
to provide SUBARU service personnel
with the necessary information and data
for the correct maintenance and repair
of SUBARU vehicles.
This manual includes the procedures
for maintenance, disassembling, reas-
sembling, inspection and adjustment of
components and diagnostics for guid-
ance of experienced mechanics.
Please peruse and utilize this manual
fully to ensure complete repair work for
satisfying our customers by keeping
their vehicle in optimum condition.
When replacement of parts during
repair work is needed, be sure to use
SUBARU genuine parts.
All information, illustration and specifi-
cations contained in this manual are
based on the latest product information
available at the time of publication
approval.
FUJI HEAVY INDUSTRIES LTD.
QUICK REFERENCE INDEX
HVAC SYSTEM
(HEATER, VENTILATOR AND A/C)
HVAC SYSTEM (AUTO A/C)
(DIAGNOSTICS)
AIRBAG SYSTEM
AIRBAG SYSTEM (DIAGNOSTICS)
SEAT BELT SYSTEM
LIGHTING SYSTEM
WIPER AND WASHER SYSTEMS
ENTERTAINMENT
COMMUNICATION SYSTEM
GLASS/WINDOWS/MIRRORS
BODY STRUCTURE
INSTRUMENTATION/DRIVER INFO
SEATS
SECURITY AND LOCKS
SUNROOF/T-TOP/CONVERTIBLE TOP
(SUNROOF)
EXTERIOR/INTERIOR TRIM
EXTERIOR BODY PANELS
AC
AC(diag)
AB
AB(diag)
SB
LI
WW
ET
COM
GW
BS
IDI
SE
SL
SR
EI
EB
G2320GE7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2004 LEGACY BODY SECTION and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Subaru 2004 LEGACY BODY SECTION

  • Page 1: Body Section

    AC(diag) (DIAGNOSTICS) AIRBAG SYSTEM AIRBAG SYSTEM (DIAGNOSTICS) AB(diag) This service manual has been prepared to provide SUBARU service personnel SEAT BELT SYSTEM with the necessary information and data for the correct maintenance and repair of SUBARU vehicles. LIGHTING SYSTEM This manual includes the procedures...
  • Page 2 2003 LEGACY SERVICE MANUAL QUICK REFERENCE INDEX BODY SECTION CRUISE CONTROL SYSTEM CRUISE CONTROL SYSTEM CC(diag) (DIAGNOSTICS) IMMOBILIZER (DIAGNOSTICS) IM(diag) LAN SYSTEM (DIAGNOSTICS) LAN(diag) G2320GE7...
  • Page 3: Table Of Contents

    ENTERTAINMENT Page General Description ..................2 Audio System ....................3 Front Accessory Power Supply Socket System ..........4 Audio ......................5 Front Speaker .....................6 Tweeter .......................7 Squawker ....................8 Rear Speaker ....................9 Woofer.......................10 Power Amplifier ..................11 Antenna.....................12 Antenna Amplifier..................13 Noise Suppressor..................14 Navigation Display ..................15 GPS Antenna ....................16 Navigation Body ..................17 Front Accessory Power Supply Socket .............18 Steering Satellite Switch ................19...
  • Page 4: General Description

    General Description ENTERTAINMENT 1. General Description A: CAUTION • Before disassembling or reassembling parts, al- ways disconnect the battery ground cable. When replacing the audio, control unit, and other parts provided with memory functions, record the memo- ry contents before disconnecting the battery ground cable.
  • Page 5: Audio System

    Audio System ENTERTAINMENT 2. Audio System A: WIRING DIAGRAM <Ref. to WI-116, WIRING DIAGRAM, Audio System.> B: INSPECTION Symptom Repair order No power coming in. (No display and no sound from speakers) (1) Check the fuse and power supply for audio. (2) Check the audio ground.
  • Page 6: Front Accessory Power Supply Socket System

    Front Accessory Power Supply Socket System ENTERTAINMENT 3. Front Accessory Power Sup- ply Socket System A: WIRING DIAGRAM <Ref. to WI-242, WIRING DIAGRAM, Front Acces- sory Power Supply Socket System.> ET-4...
  • Page 7: Audio

    Audio ENTERTAINMENT 4. Audio A: REMOVAL 1) Disconnect the ground cable from battery. 2) Remove the console box. <Ref. to EI-53, RE- MOVAL, Console Box.> 3) Remove the console front panel. <Ref. to EI-54, REMOVAL, Center Console.> 4) Remove the console side garnish. <Ref. to EI- 54, REMOVAL, Center Console.>...
  • Page 8: Front Speaker

    Front Speaker ENTERTAINMENT 5. Front Speaker A: REMOVAL 1) Disconnect the ground cable from battery. 2) Remove the front door trim. <Ref. to EI-48, RE- MOVAL, Door Trim.> 3) Remove the front speaker mounting screws. ET-00080 4) Disconnect the harness connector and remove front speaker.
  • Page 9: Tweeter

    Tweeter ENTERTAINMENT 6. Tweeter A: REMOVAL 1. MODEL WITH TWEETER 1) Disconnect the ground cable from battery. 2) Remove the front door trim. <Ref. to EI-48, RE- MOVAL, Door Trim.> 3) Remove the tweeter mounting screws. ET-00081 4) Disconnect the harness connector and remove tweeter.
  • Page 10: Squawker

    Squawker ENTERTAINMENT 7. Squawker A: REMOVAL NOTE: Model with McIntosh audio system only. 1) Disconnect the ground cable from battery. 2) Remove the front door trim. <Ref. to EI-48, RE- MOVAL, Door Trim.> 3) Remove the squawker mounting screws. ET-00083 4) Disconnect the harness connectors and remove squawker.
  • Page 11: Rear Speaker

    Rear Speaker ENTERTAINMENT 8. Rear Speaker A: REMOVAL 1) Disconnect the ground cable from battery. 2) Remove the rear door trim. <Ref. to EI-48, RE- MOVAL, Door Trim.> 3) Remove the rear speaker mounting screws. ET-00084 4) Disconnect the harness connector and remove the rear speaker.
  • Page 12: Woofer

    Woofer ENTERTAINMENT 9. Woofer 4) Remove the woofer bracket mounting clips (A) and screws, and then remove the woofer bracket. A: REMOVAL 1. SEDAN MODEL NOTE: Model with McIntosh audio system only. 1) Disconnect the ground cable from battery. 2) Remove the rear shelf trim. <Ref. to EI-70, RE- MOVAL, Rear Shelf Trim.>...
  • Page 13: Power Amplifier

    Power Amplifier ENTERTAINMENT 10.Power Amplifier A: REMOVAL 1) Disconnect the ground cable from battery. 2) Remove the passenger’s seat. <Ref. to SE-7, REMOVAL, Front Seat.> 3) Disconnect the harness connector. 4) Remove the nuts to remove power amplifier. ET-00029 B: INSTALLATION Install in the reverse order of removal.
  • Page 14: Antenna

    Antenna ENTERTAINMENT 11.Antenna 3) Apply conductive silver composition (DUPONT No. 4817) on the broken portion with a drawing A: INSPECTION pen. Measure the resistance between antenna terminal and each antenna wire. If an antenna wire is OK, resistance will be less than 1 Ω.
  • Page 15: Antenna Amplifier

    Antenna Amplifier ENTERTAINMENT 12.Antenna Amplifier C: INSPECTION Measure the resistance of antenna amplifier. A: REMOVAL • Sedan model 1. SEDAN MODEL (1)-a 1) Disconnect the ground cable from battery. (1)-b 2) Remove the rear quarter trim. <Ref. to EI-63, SEDAN MODEL (MODEL WITH CURTAIN AIR- BAG), REMOVAL, Rear Quarter Trim.>...
  • Page 16: Noise Suppressor

    Noise Suppressor ENTERTAINMENT 13.Noise Suppressor A: REMOVAL 1. SEDAN MODEL 1) Disconnect the ground cable from battery. 2) Remove the rear quarter trim. <Ref. to EI-63, SEDAN MODEL (MODEL WITH CURTAIN AIR- BAG), REMOVAL, Rear Quarter Trim.> 3) Remove the curtain airbag module. <Ref. to AB- 18, REMOVAL, Curtain Airbag Module.>...
  • Page 17: Navigation Display

    Navigation Display ENTERTAINMENT 14.Navigation Display A: REMOVAL 1) Disconnect the ground cable from battery. 2) Remove the clips, and then remove the center upper panel. ET-00097 3) Remove the display mounting screws. ET-00098 4) Disconnect the harness connector, and then re- move the navigation display.
  • Page 18: Gps Antenna

    GPS Antenna ENTERTAINMENT 15.GPS Antenna A: REMOVAL 1) Disconnect the ground cable from battery. 2) Remove the combination meter. <Ref. to IDI-16, REMOVAL, Combination Meter Assembly.> 3) Remove the GPS antenna mounting screw, and then remove the GPS antenna. ET-00099 ET-00100 4) Remove the audio.
  • Page 19: Navigation Body

    Navigation Body ENTERTAINMENT 16.Navigation Body A: REMOVAL 1) Disconnect the ground cable from battery. 2) Remove the glove box. <Ref. to EI-51, REMOV- AL, Glove Box.> 3) Remove the navigation body mounting screws in numerical order and pull it out. NOTE: To remove the screw (4) easier, move the naviga- tion body after removing the screw (3).
  • Page 20: Front Accessory Power Supply Socket

    Front Accessory Power Supply Socket ENTERTAINMENT 17.Front Accessory Power Sup- ply Socket A: REMOVAL 1. FRONT 1) Disconnect the ground cable from battery. 2) Remove the console front panel. <Ref. to EI-54, REMOVAL, Center Console.> 3) Disconnect the harness connector, and remove the accessory power supply socket.
  • Page 21: Steering Satellite Switch

    Steering Satellite Switch ENTERTAINMENT 18.Steering Satellite Switch A: REMOVAL 1) Disconnect the ground cable from battery. 2) Set the tire to the straight-ahead position. 3) Remove the airbag module. <Ref. to AB-14, RE- MOVAL, Driver’s Airbag Module.> WARNING: With the airbag module equipped, always refer to “Airbag System”...
  • Page 22 Steering Satellite Switch ENTERTAINMENT C: INSPECTION 2 3 4 6 7 8 CS-00306 Step Check Is the resistance approx. 22 Ω? Go to step 2. MUTE SWITCH CONTINUITY CHECK. Replace the satel- 1) Press the mute switch. lite switch. 2) Measure the resistance between satellite switch connector terminals.

This manual is also suitable for:

2004 legacy

Table of Contents