13.4 Jog Speed Table Operation
13.4.5 Jog Speed Table Operation Example
Information
This concludes the saving procedure.
13.4.5 Jog Speed Table Operation Example
This example shows how to perform operation by using the /JOG0 to /JOG3 (Jog Speed
Selection) signals to specify the jog speeds that are registered in the jog speed table.
Speed
/JOGP
*1
/JOGN
*2
/JOG0
/JOG1
/JOG2
/JOG3
*1.
Forward operation at the jog speed is performed while the /JOGP signal is ON.
*2.
Reverse operation at the jog speed is performed while the /JOGN signal is ON.
13-50
You can use the Import Button to load the jog speed table saved in a file to the SERVO-
PACK.
JSPD5
JSPD7
JSPD6
JSPD2
JSPD3
JSPD1
JSPD0
JSPD4
JSPD12
JSPD13
JSPD15
JSPD14
JSPD10
JSPD11
JSPD9
JSPD8
JSPD8